spec no: dsaf2303 rev no: v.1 date: apr/15/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp:1101008174 - 01 package dimension s notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. specifications are subject to change without notice. t- 1 (3mm) solid st ate lamp features low power consumption. popular t - 1 diameter package. general purpose leads. reliable and rugged. long life - solid state reliability. available on tape and reel. rohs compliant. description the bright red source color devices are m ade with gallium phosphide red light emitting diode. WP7104HD brigh t red
spec no: dsaf2303 rev no: v.1 date: apr/15/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp:1101008174 - 01 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3 . 5mm below package base. part no. dice lens type iv (mcd) @ 10ma viewing angle min. typ. 2 ? 1/2 WP7104HD bright red (gap) red diffused 1 3 40 symbol parameter device typ. max. test conditions units peak peak wavelength bright red 700 nm i f =20ma d dominant wavelength bright red 660 nm i f =20ma ? 1/2 spectral line half - width bright red 45 nm i f =20ma c capacitance bright red 40 pf v f =0v;f=1mhz v f forward voltage bright red 2.25 2.5 v i f =20ma i r reverse current bright red 10 ua v r = 5v parameter bright red units power dissipation 120 mw dc forward current 25 ma peak forward current [1] 130 ma reverse voltage 5 v operating / storage temperature - 40c to +85c lead solder temperature [2] 260c for 3 seconds lead solder temperature [3] 260c for 5 seconds
spec no: dsaf2303 rev no: v.1 date: apr/15/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp:1101008174 - 01 bright red WP7104HD
spec no: dsaf2303 rev no: v.1 date: apr/15/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp:1101008174 - 01 packing & label specifications WP7104HD remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|